Monoatomic Gold White Powder Gold

by monoatomicwhitepowderormusgold

The S-ORME is the lowest state in which monoatoms can exist and is, the most stable A T-metal monoatom which is in a -1 oxidation state is in a lower energy state than the same T-metal would be in at zero state with metal-metal bonding therefore. All of which are coupled with waters of hydration and normally found with silica and alumina gENERAL DESCRIPTION OF INVENTION
During efforts to effect quantitative analytical separations of transition metals from naturally occurring materials, it was discovered that ORMEs exist naturally and are found in salts with alkali metals and/or alkaline earth metals. The 4d electron energies of silver and rhodium are almost identical to the 5s; orbital energies, and the 5d gold and iridium electron energies are approaching the 6s level energies. Illustrated in FIGURE 4, the existence of the electron pairing is confirmed by infrared analysis, which identities the vibrational and rotational motions caused by energy exchange between these two mirror image electrons. BACKGROUND OF INVENTION
Inorganic chemists working with soluble salts of noble metals until relatively recently have assumed that the metals were dissolved as free ions in aqueous solutions. G. 150 ml 6M hydrochloric acid were added to the just dry salts and boiled again to evaporate off the liquid to just dry salts. This is an indication that there is still Na2Au2Cl8 present if a black or brown precipitate forms. Will provide a total energy condition of the atom which is considerably below or lower than the atom as it exists in a metallic form this repopulation, if performed in the presence of an unlimited source of electrons (reducing conditions). ”

From the study of the behavior of gold and other transition metals in solution, it is now believed that all such metals have atomic aggregations and occur as at least diatoms under normal conditions of dissolution. (9) The pH is adjusted very slowly with dilute sodium hydroxide solution, while constantly stirring, until the pH of the solution remains constant at 7. Thus forming a metallic element-carbon chemical bond such as carbon, this oxidation rearrangement is effected by subjecting the G-ORME to a large negative potential in the presence of an electron-donating element. 0 for a period of more than twelve hours. 0 during the neutralization. Then any electrons moving between individual Monoatomic Gold atoms will demonstrate an ac Josephson junction type of response once the externally applied field exceeds the level which overcomes the protective Meissner Field of the S-ORME system ( “Hc2” ). Steps (11) and (12) provide a complete conversion of the product to a sodium-gold nitrate. The physics of the electron orbitals are actually more similar to those relating to a gas or solid solution which require density evaluation between atoms at greater distances. Again it is essential not to overheat or bake. Alternatively this rearrangement can be achieved chemically by reacting NO gas with the T-metal ORMEs other than gold. The fact that d orbital electron overlap occurs in the metal-metal bonded salt allows an analysis of many of the same characteristic omissions as the metal itself. (7) The aqueous sodium chloride solution is very gently boiled to a just dry salt, and thereafter the salts were taken up alternatively in 200 ml deionized water and 300 ml 6M hydrochloric acid until no further change in color is evidenced. The sodium, does not d orbitally overlap the gold atom as it has no d electrons, resulting in a surface reaction between the sodium ATOMS and the gold atoms however. This procedure leads to a greater degree of sub- division to provide smaller clusters of gold chloride. This results in a weakening of the gold-gold cluster stability and causes the eventual formation of a sodium-gold linear bond with a weakened d orbital activity in the individual gold atoms. The product obtained should be white crystals. The electron pair will be bound in the valence orbitals of the atom. Single element ORME achieves long-range quantum electron pair movement, that many-body system according to the present invention is defined as an S-ORME system when a macro system of high purity. Thermal annealing reduces the time dependency of the electron pairs in achieving their lowest total energy therefore. The solution is boiled to obtain just dry crystals if white crystals are obtained. The pH is adjusted very slowly with dilute sodium hydroxide to 7. The presence of water is essential to break apart the diatoms of gold. The solution is gently boiled down to 10 ml and 10 ml concentrated nitric acid is added to provide a sodium-gold nitrate. These same characteristics apply to all ORMEs. Will provide a chloride of sodium-gold the sodium-gold compound, formed by repeated evaporation to salts. 99% pure) were dispersed in 200 ml aqua regia to provide clusters of gold atoms. For that metal-carbon bond to occur the carbon must provide for the horizontal removal of the d orbital vacancy of the ORME. The product will be a white precipitate in water. The nitrate is an oxidizer and removes the chloride as is apparent. In this case, a sodium auride this element replaces the aurous (Au+1) forming. One could say it accelerates the natural it is not “Monoatomic Gold”. The monoatomic gold is placed in a porcelain ignition boat and annealed at 300C under an inert gas to remove hydrogen and to form a very chemically and thermally stable white gold monomer. The process was repeated until no further fumes evolved, thus indicating that the nitric acid had been removed and the gold had been converted completely to the gold chloride. G-ORME stability is demonstrated by unique thermal and chemical properties. (5) 150 ml 6M hydrochloric monoatomic gold were added to the just dry salts and boiled again to evaporate off the liquid to just dry salts. As this process of phonon emission by electrons during pairing is a function of temperature and time, i thermal annealing can decrease the time required to reach ground state. The doublet in the IR spectrum will disappear because electron pairs are no longer bound in a fixed position on the individual ORME monoatoms due to the minimum external magnetic field being applied, when the quantum flux flow commences. Thermal annealing to 800C and subsequent cooling to ambient temperature under He or Ar gas atmosphere to remove thechemically bound proton of hydrogen will produce Monoatomic Gold which contain a two-level system resulting from electron pairing within the individual atom. 5 ml concentrated nitric acid are added to the crystals and again boiled to where the solution goes to just dry. This negative potential enables an interreaction of the s orbital with chemiabsorbed water through electron donation and reception. Accordingly, Monoatomic Gold are not detected in these ores as the corresponding “metals” using conventional analysis and, because of their non- metallic, orbitally rearranged monoatomic form, isolated or separated in a pure or substantially pure form until the present invention were not detected. (13) 10 ml deionized water are added and again boiled to just dry salts. Ditto for the cliff notes. (3) The volume of the dispersion was reduced by careful heating until the salt was just dry. Therefore, reduction of the chloride salt to the metal, requires a simple reductive elimination of the chlorides that are attached to the metal cluster. Some very sincere good folks using other valid but different methods for making ormus suggest there is no “high-spin” state. This adjustment may take several days. Cooling to room temperature is sufficient for all element ORMEs with the exceptions of silver, which require a lower temperature copper, cobalt and nickel. For ease of description the invention will be primarily described by the preparation of a gold ORME (“G-ORME”) from commercially available metallic yellow monoatomic gold. The Au atoms have water at the surface which creates a voluminous cotton-like product. The dry solid should be light grey in color which is HAuXH2O and is easily removed from the filter paper. Detection of doublets does not provide an analytical method for the identification of ORMEs per se, but rather detects the presence of the electron pair or pairs which all specifically prepared ORMEs possess and which T- metals do not possess under any condition. The above general description for the preparation of Monoatomic Gold from commercially available metallic gold is applicable equally for the preparation of the remaining ORMEs, except for the specific potential energy required and the use of nascent nitrogen (N) rather than carbon to convert the other ORMEs to their constituent metallic form. The aqueous sodium chloride solution is very gently boiled to a just dry salt, and thereafter the salts were taken up alternatively in 200 ml deionized water and 300 ml 6M hydrochloric acid until no further change in color is evidenced. The frequency of these emissions will be proportional to the applied external magnetic field. E. (17) The white precipitate is decanted off from any dark grey solids and filtered through a 0. Gold metal that has been dissolved with aqua regia, and subsequently converted to gold chloride by repeated evaporation with HCl to remove nitrates, is commonly referred to as the acid chloride solution of AuCl3 or HAuCl4. 45 micron cellulose nitrate filter paper. 45 micron cellulose nitrate filter paper. This condition has been referred to by physicists as “adiabatic ground state”. Subsequent annealing produces the G-ORME. The NaAu hydrolyzes with the water and dissociates to form Monoatomic Gold. This step eliminates any excess nitric acid which may be present. Then the electron pairing produces the characteristic doublets if this annealing is performed in the absence of an external magnetic field. A specific voltage will be produced for each specific applied frequency. Therefore, g-ORMEs have no unpaired valence electrons and, tend not to aggregate as would clusters of gold which have one or more unpaired valence electrons. It was established that many elements and in particular the transition metals are present in aqueous solutions as metal-metal bonded clusters of atoms in the 1960’s, with the advent of greater analytical capabilities. Leaving only NaAu in water this will eliminate all free acid. When d orbital bonding is achieved, the s bonding is made more stable by overlapping of the two energy levels the chemical stability of the smaller clusters is much less than that of the metal because, in addition. Exhibit the same characteristic emissions of their corresponding T-metal when subjected to analysis by instruments which depend upon electronic transitions oRMEs do not, therefore. The application of a minimum external magnetic field will cause the S-ORME system to respond by creating a protective external field [“Meissner Field”] that will encompass all those S-ORMEs within the 20 A limit. Water can act to remove electrons. Magnetic, and chemical properties physical, the ORMEs of this invention can be used for a wide range of purposes due to their unique electrical. G. The doublet is located at approximately 1427 and 1490 cm-1 for a rhodium ORME. In a diatom of gold, the two odd spin electrons will be found on one of the two atoms but not both. Au4Cl12, this recognition has led to the discovery that gold metal salts will exist in Monoatomic Gold solutions originating from metals as clusters of Au2Cl6, Au3Cl9, up to Au33Cl99. The boxed areas designated A, B, and C establish that the 3d electron energies of copper and cobalt are very close to the same energy level as the 4s electron energies. Unlike single electrons, all of the electron pairs in their lowest energy state, can exist in the same quantum state. The monomeric auride (Au-1) is unstable and seeks a lower energy state which is represented by a partial filling of the d and s orbital”. 8 V and -2. The solution will have a pH of approximately 1. The metallic electron orbital arrangement leads to calculations for energies, which results are inconsistent since the energies of the supposedly occupied states are higher than the supposedly unoccupied states. Water molecules possess a net charge and attach to each other in vertical clusters so that an 18 molecule water cluster can hold a cumulative potential of -2. Thus forming metallic gold when the element-carbon bond is reduced by way of further decreasing the potential, the carbon receives a reducing electron and subsequently vertically inserts that reducing electron below the s orbitals of the element. An example is the performance of commercial rhodium as a hydrogen- oxidation catalyst compared with the performance of the rhodium ORME as used in a hydrogen-oxidation catalyst. The presence of water is essential to break apart the diatoms of gold. Elements normally containing an s1 T-metal configuration do not produce an IR doublet after H2 reduction. Rhodium and iridium S-ORMEs have been prepared which exhibit superconductivity characteristics. It is now recognized by most chemists who regularly handle chlorides of gold that gold metal ceases to disaggregate when the HNO3 is removed and in fact can reaggregate under certain conditions and precipitate out of HCl solutions as metal. “minimum external magnetic field” is defined as a magnetic field which is below the critical magnetic field which causes the collapse of the Meissner Field as used herein. And the sample brought to boil and checked for evolution of NOCl fumes 60 ml concentrated HCl were added. The Monoatomic Gold made according to this invention will exhibit the special properties described in the “General Description” of this application, special magnetic properties, including catalytic activity, resistance to sintering at high temperatures, and resistance to aqua regia and cyanide attack The just dry salt is diluted with 400 ml deionized water to provide a monoatomic gold salt solution of Monoatomic Gold (8) After the last treatment with 6M hydrochloric acid, and subsequent boildown. The cooling side of the annealing cycle is essential to effect a full conversion to an Monoatomic Gold state. This step eliminates any excess nitric acid which may be present. And remains an amorphous powder at 1200C it also does not sinter at 800C under reducing conditions. The reverse physical process of adding specific frequencies can generate the inverse relationship, i. No chlorides are present. Reduction of clusters of gold having greater than 11 atoms of metal is easily performed since the atoms themselves are spaced from each other in the salt similar to their spacing in the metal itself before dissolution >

Specifically. The participating ORMEs will act as a very precise tuning device for electromagnetic emissions emanating from free electrons between ORMEs. This step causes the nitrate to dissociate to obtain NaAu in water with a small amount of HNO3 remaining. The white powder product obtained from the filtration and drying is pure G-ORME. The amount of d orbital bonding activity is in direct proportion to the cluster size. The just dry material is diluted to 80 ml with deionized water thereafter. The insoluble white gold is filtered on 0. The salt will analyze as substantially pure Au2Cl6. The atoms of each ORME do not have d electron orbital overlap as do their corresponding T-metal clusters. “The steps of getting there are the qualities of being there. Is an insulator and not a metal the atom, therefore. Such as sodic plagioclase or calcidic plagioclase ores the ORMEs of this invention exist in nature in an unpure form in various materials. The pH is approximately 1. (14) Thereafter, the just dry material is diluted to 80 ml with deionized water. 5 V depending on the particular element. (18) The filtered white precipitate on the filter paper is vacuum dried at 120°C for two hours. E. This step causes the nitrate to dissociate to obtain NaAu in water with a small amount of HNO3 remaining. For Pd II, it is known that there exists a critical size, Ag I and Au III, which is necessary for metal deposition from solution by way of example, in the range of 3-20 Monoatomic Golds. And the sample brought to boil and checked for evolution of NOCl fumes 60 ml concentrated HCl were added. Charging etc david Hudson Patent for the Preparation of G-ORME

Sources for pure G-ORME

David Hudson, the final steps, but not enough for one to make something prematurely re: in the true tradition of alchemy left some steps out; enough information to get the patent, and indeed enough information for one to begin to proceed. The G-ORME has an electron rearrangement whereby it acquires a d orbital hole or holes which share energy with an electron or electrons. G-ORMEs require a more negative potential than -2. X-ray fluorescence or x-ray diffraction spectrometry will not respond the same as they do with T-metals in standard analysis moreover. Until the pH of the solution remains constant at 7 the pH is adjusted very slowly with dilute sodium hydroxide solution, while constantly stirring. No chlorides are present. 50 Monoatomic Gold. But not beyond a diatom state the T-metals, when subjected to conventional wet chemistry will disaggregate through the various known levels. The carbon acts like a chemical fulcrum. Sources for pure G-ORME

David Hudson’s Patent

DAVID HUDSON PATENT FOR NON-METALLIC, MONOATOMIC GOLD FORMS OF TRANSITION ELEMENTS

This invention relates to themonoatomic forms of certain transition and noble metal elements, copper, namely, silver, nickel and the six platinum group elements cobalt, gold. E. At the end of this procedure an orangish-red salt of gold chloride is obtained. (21) The insoluble white gold is filtered on 0. Conversely, atomic orbital calculations of high atomic density metals give results that correspond to valence charge rearrangement. The proximity of the energy bands of the T-metals makes them unique with respect to other elements. If a specific ORME is formed from a specific T-metal by using the procedure of this invention, it can only be confirmed by conventional analytical methods that the specific ORME was formed by reconstituting it as the T-metal. Similar to the condition existing when a metal goes through a glass transition the absolute temperature of an Monoatomic Gold system as compared to the absolute temperature of its respective T- metal is significantly lower. 99% pure) were dispersed in 200 ml aqua regia to provide clusters of gold atoms. Re-establishes the d orbital overlap 2 V. An aqua regia solution of metallic gold is prepared. Have lost electrons: i and the chlorine is negative. It is the existence of the doublet that is critical, not its exact location in the IR spectra. Electron pairing provides a more stable and lower energy state for the monoatom. 2. This invention also relates to the recovery of the metallic form of each of the aforesaid transition and noble metal elements from the orbitally rearranged monoatomic forms. Quantum electron pair movement can be produced and maintained in the range of one gauss up to approximately 140 gauss in the case of Ir and, including the earth’s magnetic field, no IR doublet will be detected in this resulting quantum state if the annealing is performed in the presence of an external magnetic field, therefore. The resultant form of the element is an ORME. The solution is gently boiled down to 10 ml and 10 ml concentrated nitric acid is added to provide a sodium-gold nitrate. The solution is then diluted with deionized water to a volume of 400 ml. The final potential of -2. Full equation of the sodium-gold diatom will slowly occur and chloride is removed from the complex when the salts are dissolved in water and the pH slowly adjusted to neutral. But presently such distinctions are not known it is believed that physical and chemical distinctions exist with respect to the different ORMEs. E. Full patent follows. After the pH is stabilized at pH 7. It is then necessary to restart the process at step (1) if present. And the six platinum group elements, cobalt and nickel, copper, silver, the following definitions shall apply: transition elements (“T-metals”) means the metallic or cationic form of gold, for the purposes of this application, i. The ORME is electronically rearranged and electron paired, but relative to time has not reached the lowest total energy condition of the S-ORME. By subjecting the ORME to a two- stage electrical potential to “oxidize” the element to the metallic form an ORME can be reaggregated to the T- metal form using conventional wet chemistry techniques. The white powder product obtained from the filtration and drying is pure Monoatomic Gold. Causing the currents to cycle in an accelerated and more powerful way then natural breathing not unlike some ancient techniques of pranayam. The product obtained should be white crystals. To quantify electron pairs using electron quanta thermal treatment, attempting to quantify the number of electrons remaining in an Monoatomic Gold is extremely difficult due to the electrons lost to oxidation, except from theory, and the inability. The present disclosure only highlights superconductivity and catalysis, but much wider potential uses exist, including energy production. However, it is not commonly understood, why the gold that is dissolved with less HNO3 is easier to reduce to the metal from a chloride solution than gold that is dissolved using a greater amount of HNO3. Any dark grey solids of sodium auride should be redissolved and again processed starting at step (1). In these salts the sodium and gold are believed to be charged positive, i. The pH is approximately 1. The Au atoms have water at the surface which creates a voluminous cotton-like product. 10 ml deionized water are added and again boiled to just dry salts. The salts contain very tightly bound diatoms or larger clusters of gold when the gold salts originate from a metal having gold-gold bonding. E. This lower energy state with its greater stability is achieved by the electron-donating and removing capability of H2O. Continued aquation results in disassociation of the gold atom from the sodium and the eventual formation of a protonated auride of gold as a gray precipitate. (12) 5 ml concentrated nitric acid are added to the crystals and again boiled to where the solution goes to just dry. As does rhodium, the rationale for this representation of a gold diatom is based upon the fact that a single gold atom has an odd spin electron, iridium, cobalt and copper of the T-metals gold. But the solid residue had not been “baked” or scorched “Just dry” as used herein means that all of the liquid had been boiled off. 0 + Monoatomic Gold. When the two atoms s bond, therefore, their density is lower than when there is both d and s bonding their atomic distances are further apart and. Or they can d and s bond they can d bond, when two transition metal atoms are bound together, or s bond. As hereinafter described this proximity allows an easier transition to their lowest energy state. Will not be dissolved by aqua regia, and will not wet or amalgamate with mercury the G-ORME will not react with cyanide. At the end of this procedure an orangish-red salt of gold chloride is obtained. Mono-atomic form of the T-metal, sodium, will first form a diatom and then electron orbitally rearrange to the non- metallic, ie potassium or lithium. The solution will have a pH of approximately 1. Au-1 bonded to Au+1. The most stable form of T-metal elements therefore, the Monoatomic Gold is the lowest state in which monoatoms can exist and is. These characteristics are contrary to what is observed for metallic gold and/or gold cluster salts. A one microvolt external potential will produce electromagnetic frequencies of 5×108 cycles per second. Annihilation radiation frequencies (about 1020 cycles per second) will be the limiting frequency of the possible emission. This step was repeated four times. An S-ORME system does not possess a crystalline structure but the individual Monoatomic Gold will, over time, space themselves as uniformly as possible in the system. If a black or brown precipitate forms, this is an indication that there is still Na2Au2Cl8 present. (15) The pH is adjusted very slowly with dilute sodium hydroxide to 7. The ignited white gold can be cleaned of remaining traces of sodium by digesting with dilute nitric acid for approximately one hour after cooling. The presence of the aqueous sodium chloride provides the salt Na2Au2Cl8. A new source of superconductive materials is made available by this invention accordingly. In the same way that it takes energy to dissociate water into H2 and O2 it will take energy to break the electron pair for example. This treatment provides gold chloride clusters of greater than 11 atoms. The presence of the aqueous sodium chloride provides the salt Na2Au2Cl8. Will form sodium hydroxide and a monomeric water-soluble auride when in aqueous solution at or near neutral pH, the sodium auride. It is established, that the ORME does not have valence electrons available for standard spectroscopic analysis such as atomic absorption, emission spectroscopy or inductively coupled plasma spectroscopy however. The present invention enables the breaking of the diatom bond by introducing a more electro-positive element, which does not have a d orbital overlap capability such as sodium or any alkali or alkaline earth elements. Further, the applications to which the ORMEs are directed will establish their relationship to a specific T-metal by virtue of the manner in which the ORME performs in that application as compared to the performance of commercially available derivatives of the T-metal. 45v to be reduced, a potential that cannot be achieved with ordinarily known aqueous chemistry. The (Ir) Monoatomic Gold and the (Au) Monoatomic Gold systems have a minimum critical field (”Hc1”) that is below the earth’s magnetic field. With pictures © 1990 (commentary not the patent)

This first section is the abreviated “cliff notes”. This step is repeated once. The filtered white precipitate on the filter paper is vacuum dried at 120C for two hours. The 6M hydrochloric acid is used in the last treatment. 5 V overcomes the water potential to deposit gold onto the cathode. 8 and -2. This procedure leads to a greater degree of sub-division to provide smaller clusters of gold chloride. This state of electron pairing is a total lower energy state in much the same way that chemical combinations of elements are in a lower energy state than the constituent uncombined elements. And will require different chemical procedures relative to purification problems or oxidation-reduction reactions, these cluster salts are actually in solution with the HCl and water, depending on the degree of clustering. Pairing by those electrons becomes possible and over time occurs. This overlying positive magnetic field reduces the Coulomb repulsion energies that normally exist between the valence electrons. If this condition is relaxed and the bands allowed to repopulate in order to further lower the total energy, both bands will become partially filled. This pairing occurs under the influence of a magnetic field external to the field of the electrons. E. A phenomenon of electron pairs is that the interacting, spin-paired electrons initially interreact by emitting phonon energy. Elements with an s2 T- metal configuration such as Ir (d7s2) will produce a doublet. Relative to their attractive forces g-ORMEs are stable and possess strong interatomic repulsive magnetic forces. 0 + 0. E. It takes place only with the pure precious metals rather than the very valid plant and sea alchemy that are the initial schools of alchemy taught to any student for them there is not; it is not a natural occurance in material derived from natural sources. Magnetic, chemical, the electron rearrangement bestows upon the monoatomic elements unique electronic, and physical properties which have commercial application. Carbon monoxide is formed and the ORME forms Au+Au+, a metallic bonded diatom of gold when the Monoatomic Gold is chemically bonded to carbon in an aqueous solution of ethyl alcohol under a specific potential, which under continued application of potential and dehydration reduces to Au+1 Au-1, a black precipitate. The 6M hydrochloric acid is used in the last treatment. The minimum critical field for a (Rh) S-ORME is slightly above the earth’s magnetic field. Solutions of the metals will always contain two or tore atoms in the cluster form under the normal aqueous acid chemistry used for transition metals. While not directly identifiable by the aforesaid standard analyses, the existence of an ORME, can be characterized by infrared (IR) spectra by a doublet which represents the bonding energy of the electron pairs within the ORME. This step is repeated once. The total energy of the pair reduces over time until it reaches a minimum where no phonons are emitted. ORMEs do not conform to rules of physics which are generally applied to diatoms or larger clusters of metals (e. The salt will analyze as substantially pure Au2Cl6. Therefore, oRMEs must, ways which have heretofore not been used to identify T-metals be identified in new ways. This field is generated by electron pair movement within the system as a response to the minimum applied magnetic field. (10) After the pH is stabilized at pH 7. Having a very low absolute temperature, are good superconductors s-ORMEs. This will eliminate all free acid, leaving only NaAu in water. USES OF ORMEs
ORMEs, which are individual atoms of the T-metals and by virtue of their orbital rearrangement are able to exist in a stable and virtually pure form, have different chemical and physical characteristics from their respective T-metal. “high-spin” (David Hudson’s phrase). Again it is essential not to overheat or bake. ” Nuff said. Thus indicating that the nitric acid had been removed and the gold had been converted completely to the gold chloride the process was repeated until no further fumes evolved. Any dark grey solids of sodium auride should be redissolved and again processed starting at step (1). ORMEs may also, be prepared from commercially available T-metals it was discovered. Tends to form clusters of at least two atoms has only one unpaired S electron and, like gold, accordingly, the sodium. An ORME. Such as carbon, oRMEs are transformed into their original T-metal by means of a chemical bonding with an electron-donating element, which is capable of d orbital electron overlap and “spin flip”. This invention relates to the separation of the aforesaid transition and noble metal elements from naturally occurring materials in their orbitally rearranged monoatomic forms, and to the preparation of the aforesaid transition and noble metal elements in their orbitally rearranged monoatomic forms from theircommercial metallic forms more particularly. Sodium chloride is added in an amount whereby the sodium is present at a ratio 20 moles sodium per mole of Monoatomic Gold. This reconversion is accomplished by an oxidation rearrangement which removes all paired valence electrons together with their vacancy pair electrons, with a subsequent refilling of the d and s orbitals with unpaired electrons until the proper configuration is reached for the T- metal. The dry solid should be light grey in color which is HAu×XH2O and is easily removed from the filter paper. It has been recognized that the recovery of gold metal from a solution formed from aqua regia is made more difficult in proportion to the amount of HNO3 used in the initial dissolution procedures. An energy gap exists between the occupied orbitals and the unoccupied orbitals when the atomic distances of the elements are increased beyond a critical Coulomb distance. ORMEs are also often associated with sulfides and other mineral compositions. Has gained electrons. The materials of this invention are stable, substantially pure, non-metallic-like forms of the aforesaid transition and noble metal elements, “s”, and vacant “p” orbitals and have a hereto unknown electron orbital rearrangement in the “d”. The limiting condition of the ORME state is defined according to the present invention as an “S-ORME”. THEORY OF ORMES FORMATION
T-metals can possess an electron rearrangement between the d and s orbitals as seen from FIGURE 1 of the drawing which plots the principal quantum number versus the atomic number. The Monoatomic Gold state is achieved when the electron pairs have formed in the monoatom. The electron pair can not only move with zero resistance around the monoatom, when that uniform quantum state is achieved, but also can move with zero resistance between identical ORMEs that are within approximately 20 A or less of each other with no applied voltage potential. 1 moles Na to moles Au) to moist salts hCl is added to the solution and it is repeatedly evaporated with a large excess of NaCl (20. (6) Sodium chloride is added in an amount whereby the sodium is present at a ratio 20 moles sodium per mole of gold. This adjustment may take several days. Or emission spectroscopy is performed on solutions containing transition metals, x-ray fluorescence, when instrumental analysis such as atomic absorption, these analyses are based on electronic transitions. Proof of the nature of a specific ORME according to this invention is based upon the presence of a doublet in the IR spectrum, and its unique performance in specific applications compared to the constituent T-metal the reconstitution of each ORME back to its constituent T-metal. The white precipitate is decanted off from any dark grey solids and filtered through a 0. (4) The just dry salts were again dispersed in aqua regia and steps (2) and (3) were repeated. Are not identifiable as specific T-metals while in their ORME state but, as noted, oRMEs can be reconverted to their constituent T-metals. But the solid residue had not been “baked” or scorched “Just dry” as used herein means that all of the liquid had been boiled off. Silver, and the platinum group metals including platinum, which are referred to as T- metals which can have various d and s orbital arrangements, sCOPE OF THE INVENTION
The formation and the existence of ORMEs applies to all transition and noble metals of the Periodic Table and include cobalt, palladium, copper, iridium, nickel, gold, ruthenium and osmium, rhodium. Which for G-ORME is approximately -2 the first potential. 50 mg gold (99 preparation of Monoatomic Gold
G-ORME was prepared from Monoatomic Gold as follows. Enabling a pairing between opposite spin electrons from the d to s orbitals to take place at near neutral pH, is sufficient to remove an electron from the d orbital and create a positive hole, the potential of a water molecular cluster. In effect, the sodium weakens the d orbital overlapping energies between the atoms of the gold diatom as well as elevating a d orbital electron towards the s orbital, thereby creating a negative potential on the surface of the atom. This phenomenon results from canceling of the normal attractive forces arising from the net interaction between the shielded, paired electrons and the unshielded, unpaired s and d valence electrons. Care must be taken not to exceed pH 7. I it is important not to overheat. The addition of NaCl allows the eventual formation of NaAuCl4, after all HNO3 is removed from the solution. However by any term the difference in form and the function that always follows form, the effect, is apparent to anyone taking the Ormes powder. E. A diatom of gold is made by a bond between an aurous (Au+1) atom and an auride (Au-1) atom thus. This step was repeated four times. Physicists when determining the electron band energies of small atom clusters suggest that the occupation of the bands should be rearranged if the total energy is to be minimized. The limiting condition of the ORME state is defined according to the present invention as an “S-ORME”. This lowering of the perturbation reaction between the electrons and the nucleus of the monoatom because of the increased degrees of freedom allows the nucleus to expand its positive field to encompass the normally unshielded d and s valence electrons. E the conventional wet chemistry techniques if continued to be applied beyond the normally expected disaggregation on level (diatom) in the presence of water and an alkali metal. A single atom cluster will have less d bonding activity and more s bonding activity than will a cluster of 7 or more atoms therefore. And their particulate size are characteristics rendering the Monoatomic Gold suitable for manyapplications their nonmetal-like nature, their thermal and chemical stability. (11) If white crystals are obtained, the solution is boiled to obtain just dry crystals. The location can shift due to binding energy, the effect of adsorbed water, chemical potential, of the individual element in the ORME, or any external magnetic field the variances of the analytical instrument itself. As the number of atoms in the T-metal cluster decreases through continuous evaporation in the presence of NaCl, the solution becomes a solution of diatoms which in the case of gold is represented as Au- 1 – Au+1 i. G-ORME is prepared from monoatomic gold as follows: (1) 50 mg gold (99. The ignited white gold can be cleaned of remaining traces of sodium by digesting with dilute nitric acid for approximately one hour (20) After cooling. (16) The NaAu hydrolyzes with the water and dissociates to form HAu. Gold in both solutions is generally regarded as being present in the form of a free gold cation. A valid argument can be made that the term “high-spin” is not scientifically accurate. 0 during the neutralization. The nitrate is an oxidizer and removes the chloride as is apparent. And subsequent boildown, the just dry salt is diluted with 400 ml deionized water to provide a monoatomic gold salt solution of NaAuCl2’XH2O after the last treatment with 6M hydrochloric acid. The strong interatomic repulsive forces are demonstrated in that the G-ORMEs remain as a powder at 1200C. The transition metal will not normally dissolve beyond the diatom due to the extremely strong interatomic d and s orbital bonding under either acid or strong base dissolution. Iridium, and osmium; rhodium, and “ORME” means the Orbitally Rearranged Monoatomic Elemental forms of each of the T- metals palladium, ruthenium, platinum. It is important not to overheat, i. Nitric oxide is unique in that it possesses the necessary chemical potential as well as the single unpaired electron. The specific energies range between -1. The solution is then diluted with deionized water to a volume of 400 ml. Care must be taken not to exceed pH 7. Their presence in the nonmetallic form explains the inconsistent analysis at times obtained when analyzing ores for metals whereby the quantitative analysis of elements accounts for less than 100% of the ore by weight. This lower energy is the result of orbital rearrangement of electrons in the transition element. Bake. And the white oxide appearing material formed when G-ORMEs are treated with fuming HClO4 or fuming H2SO4 are dissimilar from the monoatomic gold or its salts the white saltlike material that is formed from G-ORMEs after treatment with halogens. The just dry salts were again dispersed in aqua regia and steps (2) and (3) were repeated. The product will be a white precipitate in water. Bake. It is then necessary to restart the process at step (1) if present. ORMEs are single T-metal atoms With no d orbital overlap. Thus eliminating the electron pair this invention establishes that a high potential applied to the solution forces an electron into the d orbital. The volume of the dispersion was reduced by careful heating until the salt was just dry. 45 micron paper and vacuum dried at 120C for two hours. 0 for a period of more than twelve hours. G-ORMEs can be reconverted to metallic gold from which they were formed. This solution contains clusters of gold chlorides of random size and degrees of aggregation. With conduction bands). (19) The monoatomic gold is placed in a porcelain ignition boat and annealed at 300°C under an inert gas to remove hydrogen and to form a very chemically and thermally stable white gold monomer. 45 micron paper and vacuum dried at 120°C for two hours. Steps (11) and (12) provide a complete conversion of the product to a sodium-gold nitrate. And continued boiling until the volume was reduced to approximately 10-15 ml (2) 60 ml concentrated hydrochloric acid were added to the dispersion and the mixture was brought to boil. The doublet for the other ORMEs is between about 1400 and 1600 cm-1

After H2 reduction of the individual monoatom the hydrogen ion-single element may or may not produce an IR doublet depending on the element’s normal electron configuration. These new materials require substantially less energy removal to reach the super-conductivity state and, can be used at higher temperatures than currently availablesuperconductors therefore. 2 V and for other ORMEs is between -1. A gold atom, for example, has a single atom electron orbital configuration of d10s1. And continued boiling until the volume was reduced to approximately 10-15 ml 60 ml concentrated hydrochloric acid were added to the dispersion and the mixture was brought to boll. Are in a lower energy state as compared to their respective T-metal, and thus have a lower absolute temperature as described herein, these S-ORMEs. This treatment provides gold chloride clusters of greater than 11 atoms. Chemical reduction of the sodium-gold solution results in the formation of a sodium auride. All valence electrons paired. It is now known that recovery of precious metals from aqueous solutions is much more difficult when the cluster size becomes smaller and smaller, or in actuality when the metal is better “dissolved.